Everbuild 206 Strike Release Oil 5L

Everbuild® 206 Strike Release Oil – 5 L

High-performance, water-based chemical release agent designed for easy removal of concrete formwork while producing clean, well-formed edges. Free from solvents and mineral oils, this biodegradable emulsion ensures a high-quality, blemish- and blowhole-free finish.

Key benefits

• Excellent adhesion on vertical mould surfaces, self-levelling when sprayed.
• No dilution required—ready to use straight from the container.
• Non-combustible vapour; safe and simple to apply.
• Leaves minimal residue on formwork; easy, precise demoulding.
• Protects formwork from corrosion and early aging.

Typical applications

• Smooth, absorbent, textured, and heated formwork (up to 70 °C).
• Wood, metal, ABS, PVC, polypropylene, polyurethane and other plastic moulds.

Application guidelines

• Ensure formwork is clean, dry, and free of rust or concrete residue.
• Stir thoroughly before use; apply undiluted via spray, brush, or roller.
• Use in a thin, even film—avoid over-application to prevent dusting.
• For highly absorbent formwork like unsealed timber, apply a second coat.
• Allow ~20 minutes at 20 °C for evaporation before casting concrete.

Product details

• Pack size: 5 L plastic jerry can.
• Appearance: White liquid.
• Density: Approx. 0.97 g/cm³; pH: ~8.0.
• Coverage: 50–60 m²/L for steel and plastic; 40–50 m²/L for coated plywood; 20–30 m²/L for untreated timber.
• Shelf life: 6 months when stored 5–25 °C, away from direct sunlight and frost; freeze-thawable if remixed thoroughly afterward.

Good to know

This solvent- and mineral oil-free emulsion is biodegradable and safe. It protects formwork, improves surface finish, and reduces blowhole incidence. Always test on a small area first to confirm results.