Everbuild 701 Non Slip Tile Showerproof Adhesive 7.5kg

Everbuild® 701 Non Slip Tile Adhesive – 7.5 kg

Ready-mixed, acrylic-based thin-bed tile adhesive supplied in a 7.5 kg tub. Engineered for superior slip resistance and grip, especially suitable for wet-area wall tiling in kitchens, bathrooms, and domestic showers (when used with Everbuild Powdered Wall Tile Grout).

Key benefits

• Ready to use—no mixing, no mess—just apply straight from the tub.
• Excellent non-slip properties—tiles remain firmly in place, including large-format wall tiles.
• Offers extended open time for flexible working and accurate tile placement.
• Exceptional bond strength—almost three times the British Standard minimum.

Typical applications

• Internal wall tiling in bathrooms, kitchens, and domestic showers (with Everbuild Powdered Wall Tile Grout).
• Suitable for ceramic and porcelain wall tiles and mosaics.

Usage guidance

• Apply adhesive at a thickness of 3–6 mm, covering no more than 1 m² at a time.
• In dry areas, comb with a notched trowel; in wet or damp zones, bed tiles directly into the adhesive and secure with a slight twist motion.
• Ensure tile coverage is at least 75%—lift a tile occasionally to check bond.
• Open time at 20 °C: 20–30 minutes; curing time between 24 and 72 hours depending on substrate and conditions.
• Clean tools with water while adhesive is still wet; wash hands with warm water and soap after use.

Product details

• Pack size: 7.5 kg tub.
• Appearance: Off-white, ready-mixed paste.
• Standards: Tested to EN 12004 Type D1T.
• Service temperature: –30 °C to +100 °C.
• Coverage: Approximately 0.6 m²/kg using a 6 mm notched trowel, or 0.5 m²/kg in solid bed applications.
• Density: Approximately 1.7 g/cm³.
• Shelf life: 12 months in sealed container stored between 5 °C and 25 °C; protect from frost.

Good to know

For optimal adhesion, ensure the wall surface is clean, dry, and sound. Prime porous backgrounds (e.g., new plaster) using Everbuild® 503 SBR Bond diluted 1:3 and allow to dry. Only for internal wall use—do not use on floors, in swimming pools, or where rising or penetrating damp is present.