Everbuild 702 Aquaplus Water Resistant Tile Adhesive 7.5kg

Everbuild® 702 Water Resistant Tile Adhesive – 7.5 kg

Premium-grade, ready-mixed tile adhesive supplied in a 7.5 kg tub. Specifically formulated for areas exposed to prolonged water contact, high humidity, and condensation—perfect for kitchens, bathrooms, and power showers.

Key benefits

• Exceptional water resistance—ideal for constantly wet or damp conditions.
• Extremely high bond strength—more than double the British Standard minimum in wet shear tests (after 7 days drying and 7 days water immersion).
• Ready-mixed and mess-free—just apply directly from the tub.
• Superior non-slip properties—supports large-format wall tiles (300 × 200 mm) without slippage.
• Extended open time for better tile alignment and adjustment.

Typical applications

• Interior wall tiling in bathrooms, kitchens, and power shower areas (use with Everbuild® Powdered Wall Tile Grout).
• Suitable for ceramic and porcelain wall tiles and mosaics.

Usage guidance

• Apply a 3–6 mm layer, covering up to 1 m² a time.
• In dry areas, comb with a notched trowel; in wet zones, bed tiles directly and press or twist to eliminate voids.
• Ensure at least 75% tile coverage—periodically lift a tile to check, adding more adhesive if needed.
• Open time is approximately 30–40 minutes at 20 °C; curing ranges from 24 to 72 hours depending on conditions.
• Clean tools immediately with water and wipe off excess adhesive before it dries.

Product details

• Pack size: 7.5 kg tub.
• Appearance: Thick buff paste that dries off-white.
• Standards: EN 12004 Type D2T compliant.
• Service temperature: −30 °C to +100 °C once cured.
• Coverage: Approximately 0.9 m²/kg (6 mm notched trowel) to 0.6 m²/kg in solid-bed applications.
• Density: ~1.7 g/cm³.
• Shelf life: 12 months when stored sealed between 5–30 °C; protect from frost.

Good to know

Not suitable for floors, swimming pools, or external use—use Everbuild® 705 Rapid Set Tile Mortar instead. Ensure substrate is clean, dry, and properly primed (e.g., with Everbuild® 503 SBR Bond on porous substrates) before application.