Grooved and Foiled Insulation Panel EPS150 1200x600x25mm

These Pre-Grooved Floating Floor Panels with Foil are ideal for retrofit installations. They provide a flexible, cost-effective solution for Floating Floors, Suspended Timber Floors, Floor on Floor, and Battened Floor systems.

The EPS 150 insulation panel has 150mm pipe centres pre-grooved for 16 mm accommodate pipework. The simplicity of this system means there is no drying time to this system, making it a very fast system to install and means no waiting time before laying the wooden flooring such as engineered wooden flooring, tongue and groove floorboards, or 18mm chipboard.

Joints can be taped using aluminium foil tape. These Floor panels are simply installed on to the existing floor, this can be either a solid concrete/screed floor or a suitable wooden structurally sound floor of 18mm minimum thickness (Chipboard, Floorboards or Plywood) Other Thicknesses, Strengths, and Sizes are available. Please contact us for more information.

This is a box Quantity of 10 – 7.2m2 Coverage.

PLEASE NOTE – If installing Engineered Wood flooring, so long as it is a minimum of 14mm thick and is either click or tongue and groove, you can install directly onto these boards, tiles or vinyl will require a minimum of 18mm tongue and groove over this board.

Pre-Grooved Floating Floor Panels with Foil Specification

• 25mm Thick
• 1200mm x 600mm Sheet (0.72m2 coverage)
• EPS150 Grade
• Heat Output @ 50°C MWT = 80 W/m2
• Heat Output @ 40°C MWT = 55 W/m2
• Compressive Strength* (kPa) – 150 at 10% compression
• 100 Micron Aluminium Foil