Underfloor Heating Stapled Kit with Thermostat 10M2

This Underfloor Heating Stapled Kit with Thermostat pack has been put together to cover a single zone application, covering a floor area of 10m². This stapled pack uses clips to fix the pipe on top of the insulation.

The pipe included in this pack is WRAS approved. The design of these packs allow for 200mm pipe centres to cover the required area. If you wish to run the pipe at 150m pipe centres, this will reduce the m², for example at 150mm centres on the 10m² pack the pipe will only cover 7.51m².

Underfloor Heating 10M2 Stapled Kit with Thermostat Contents

This Pack includes the following:

• 1 x 50m 16mm Pert Al WRAS Approved pipe
• Single Loop Control Pack
• 2 x 1/2″ x 3/4 Male Reducers
• 2 x 16mm fittings
• 1 x 200mm Clips
• 2 x Bend Supports
• 25m Perimeter Edging
• Heatmiser Slimline Stat

You may also require Motorised Zone Valve.