Search
Show prices tax inclusive Show prices tax exclusive
Show prices tax inclusive
All Categories
    Menu Close

    Everbuild 202 Integral Waterproofer 5L

    Free delivery over £250 (Exceptions Apply)
    Further delivery information
    30 Day Return Policy
    Need help or advice? Get in Touch
    Payment options Payment icons Visa Mastercard PayPal ApplePay
    SKU: CHE002900
    Availability: In stock
    £14.11
    i h

    Everbuild® 202 Integral Liquid Waterproofer – 5 L

    Air-entraining, liquid-gel admixture in a 5 L container. Designed to significantly reduce water permeability in mortar, renders, screeds, and concrete mixes—delivering long-term protection from water ingress while enhancing workability and strength.

    Key benefits

    • Reduces surface absorption and decreases permeability of mortar and concrete mixes.
    • Contains air-entraining agents—preserves mortar flexibility and prevents stiffness.
    • Ensures workability, easier application, and increases compressive strength.
    • Non-corrosive—safe for embedded steel reinforcement.
    • Low toxicity and freeze-stable to approximately −10 °C.

    Typical applications

    • Waterproofing below-ground structures (basements, foundations).
    • Waterproofing above-ground renders, screeds, and mortar surfaces.
    • Rendering tank linings, silage pits, ponds, pools, and external applications.

    Usage guidance

    • Add between 0.5–1 L per 100 kg of cement via gauging water, or mix one part product into 20–40 parts water.
    • Adjust water content down by up to 20% to maintain proper consistency.
    • Rendered mixes: use 3 parts sharp sand to 1 part cement for below-ground works; for external render, use 4.5 parts sand to 1 part cement in two coats at 18–20 mm thickness.
    • For pool and tank linings: 3 parts sand to 1 cement mix; apply 18–20 mm on walls and 35–38 mm on floors, with staggered joints and coving in corners.
    • Always use stiff gauging mixes to minimise cracking.

    Product details

    • Pack size: 5 L container (also available in 25 L and 200 L).
    • Appearance: Soft mobile gel.
    • Density: Approx. 1.02 g/cm³ at 20 °C.
    • Chloride content: < 0.01 % (safe for steel reinforcement).
    • Freezing point: Approximately −10 °C.
    • Standards: Tested to BS EN 934-3.
    • Shelf life: Up to 24 months in sealed packaging when stored at 5–40 °C.

    Good to know

    Not suitable for structural concrete or as a direct substitute for DPC systems. Does not repel surface water—use Everbuild® WATERSEAL for that. For tanking applications, combine with an Everbuild DPM system.

    0.0 0
    Write your own review Close
    • Product can be reviewed only after purchasing it
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *

    Please note. Product images are for illustration purposes only.